Main Project- MIDI Keyboard Light Displayer

 For our final project, our group carefully picked an interesting topic which is to display the different colours from DMX light box using the MIDI keyboard with arduino. It's main purpose is to like capture the vibe while playing the keyboard. While playing the keyboard it would generate a different types of colour from DMX light box. Each keyboard button would generate a different colour like red, green, blue and so on.


          


We did our project in class only, as we were not able to do it at home and also we had a little time so, we were not able to make it perfect. Our original plan was to make like to add the sound in keyboard but due to little time we were not able to make it. However, we were able to complete the project at the last moment. And also, we were able to show our project in the STEM FAIR which was the program conducted by university. Many people saw our project and they were happy about it. 

Overall, this project was little tough. We had to first work on the DMX light and then work on the MIDI Keyboard and at last had to combine both of them. But, also we were able to made it so, I feel happy about it.
The wiring process

And also below is the link for our youtube video.

https://www.youtube.com/watch?v=0RpxorlqtjM

Comments

Post a Comment

Popular posts from this blog

Building a MIDI Instrument

Image
MIDI (Musical Instrument Digital Interface) is a standard used for transmitting musical data between electronic devices. It allows instruments, computers and other devices to communicate with each other and to control various aspects of music such as notes, pitch, velocity and more. Information on the standard set by the MMA (MIDI Manufactures Association) can be found on this link MIDI.org – Expanding, promoting, and protecting MIDI technology for the benefit of artists and musicians around the world. There are also other Standards like; 1. USB(United Serial Bus) which is a standard interface used for connecting peripherals to computers and other devices. It allows for plug and play functionality and supports data transfer. 2. JPEG(Joint Photographic Experts Group) is a standard image compression format commonly used for storing and transferring digital images. 3. TCP/ IP(Transmission Control Protocol/ Internet Protocol) is a set of communication protocols used for connecting devices
Read more

Introduction to Arduino Uno

Image
  In our third week lab we studied about Arduino Uno. The Arduino Uno is an open-source microcontroller board based on the Microchip ATmega328P microcontroller (MCU) and developed by Arduino.cc and initially released in 2010. The microcontroller board is equipped with sets of digital and analog input/output (I/O) pins that may be interfaced to various expansion boards (shields) and other circuits. To run the code or to do test we need some hardware components like - Arduino Uno - Breadboards - Wires - USB Cable - Transducers The Arduino Uno consists of USB port to computer, reset button, clock, microcontroller, inputs and outputs. The first test was "Blink test" where we have to connect wires to uno and have to run some codes to test whether it becomes successful or not. How it works -First we have to connect arduino uno with computer by USB, -Then connect black, white and red wires in arduino uno and breadboards, -Connect red wire in A5 in arduino uno and 30e in breadboard,
Read more

Running MPU-92/65 sensor with Arduino to Measure Real time Temperature

Image
 Week 6, November 1 Things you need; - An Arduino connected with computer - MPU-9250 Sensor - F-M Dupont wire Connection of Wires - Connect black wire to Gnd of both arduino and sensor - Connect a red wire to vcc of sensor and 5v of arduino - Connect a SCL wire to A5 of arduino - Connect SDA wire to A4 - Connect INT wire to 2   CODE TO RUN THE PROGRAM By running this code, we can find the real time temperature
Read more